green body
英 [ɡriːn ˈbɒdi]
美 [ɡriːn ˈbɑːdi]
网络 生坯; 坯体; 生坯体; 素坯; 生胚
双语例句
- A new vacuum gel-casting was applied to ceramics which could reduce the air bubbles formed during the casting in the green body.
采用一种新型的真空凝胶注模成型法，减少了在凝胶注模成型时坯体中形成的气泡。 - Waste slurry mixer to cut the green body for recycling of waste generated and re-labeled the waste mud, the mud returns to lay the slurry storage tank for reuse.
废浆搅拌机把切割坯体时产生的废料进行回收并且把废料再次打成泥浆，打好的泥浆返回储浆池再次利用。 - Impact to the charging platform was increased due to increasing of the green body, as a result the charging platform often break down.
济钢中板厂由于料坯增大对上料台冲击载荷增加，使上料台损坏频繁。 - Introduced the preparation of color glaze used in unglazed ware altering to green body.
介绍了素烧坯改素坯施釉用色釉的配制。 - Tracy, 33, made a lovely Princess Fiona by daubing herself in green body paint and fake ears.
正如照片中显示，33岁的特蕾西在婚礼上模仿菲奥娜公主，将涂画成绿皮肤，并且安上了两只假耳朵。 - Blowfly with brilliant coppery green body.
身体为闪亮的铜绿色的绿头苍蝇。 - It involves pouring form, mold, car construction, delivery of the green body, stripping, cutting, code frame, the way into the kettle and other equipment are similar.
它涉及到浇注形式、模具、小车构造、坯体的运送、脱模、切割、码架、进釜的方式等设备都大同小异。 - Carlson type, such as albino protoplasts using the normal intake of green body, and then develop into normal green plants;
如卡尔森用白化型原生质体摄取正常的中绿体，进而发育成正常的绿色植物； - Of eastern North America having a bluish-gray head and mostly green body.
产于北美洲东部，头部为蓝灰色，身体大部分为绿色。 - Green body in the sea, fire of your mind.
身在绿海中，防火记心间。 - Yunnan ceramic color underglaze, glaze is used directly in the dried green body has been formed on artistic creation, and then into a firing kiln at high temperature type.
云南釉下彩陶艺，是用色釉直接在已成型晾干的素坯上进行艺术创作，然后入窑经高温一次烧成型。 - The green body made by this machine can adop toast either at not wind rotary stoves or the tunnel stoves.
该机生产的生坯可配合我厂生产的热风旋转炉或隧道烘炉烤均可。 - Mold to form a mold box with the bottom, stirred slurry by pouring foam and resting, the initial setting process of making the green body can be cut.
模框与底板形成一套模具，搅拌好的浆料通过浇注发泡、静养、初凝过程使之成为可以切割的坯体。 - The car has a drag and push the top of the function, the device only needs to change in the design process or drag mold or green body to use.
该车具有拖动和顶推的功能，此设备只在设计工艺流程中需要换向或拖动模具或坯体时使用。 - The optimization formula of green body of building material glazed tile has been developed using gangue as main raw materials and talcum as main flux.
以煤矸石为主要原料和滑石尾矿为主要熔剂，设计和优化了生产绿色环保建筑琉璃瓦坯体配方。 - Effect of reshaping technology of particle on density of green body of slip cast SiC
颗粒的整形工艺对注浆成型碳化硅素坯密度的影响 - The present work was to determine the optimum sintering system and properties of the nanometer tetragonal polycrystalline zirconia green body by the aqueous gel tape casting process.
采用水基凝胶流延工艺制备四方多晶氧化锆薄膜，确定合理的烧成制度，并考察薄膜的显微结构与烧结性能。 - With increasing solid loading, density of AGC green body increases gradually, but strength decreases gradually.
随固相体积分数的增加，水基凝胶注模法坯体密度逐渐增加，但强度逐渐降低。 - The inner and outer cracks formed in the green body of ferrite ring by wet moulding are classified.
对铁氧体磁环湿法成型土坯的内外裂纹进行分类后，逐一对内外裂纹形成的原因进行了分析、研究。 - Higher density ZnO nano-ceramic was prepared by sintering in air, with continuous compaction green body as raw material.
采用连续成型工艺压制纳米ZnO素坯，常压烧结制备了高密度纳米ZnO陶瓷。 - This paper analyzes the process for isostatic pressing of flatware, then discusses the technology property of ceramic granulates for isostatic pressing of flatware and the action to the quality of the green body.
分析了盘、碟类陶瓷制品的等静压成型过程，并详细地论述了所用陶瓷粉料的工艺性能及其对坯体质量的影响。 - A Study on Relationship between "Water Direction 、 Speed" and "Green Body" in Slip Casting The relation between principal stress orientation and fiber orientation is also studies in this paper.
注浆成型水流方向、速度与坯体研究了主应力方向与纤维夹角的关系； - In this paper, Ce-ZrO_2 and ( Ce, Y)-ZrO_2 are mixed with different CePO_4 content by mechanical milling method, followed by dry pressing and CIP ( cold isostatic press). The green body is sintered under different temperature.
本文利用机械方法将Ce-ZrO2和（Ce，Y）-ZrO2分别与不同含量的CePO4混合，采用干压成型和等静压成型，然后在不同温度下无压烧结。 - The influence of different shaping process on the microstructure and mechanical properties of green body and sinter was studied in this paper.
本文研究了不同成型工艺对反应烧结碳化硅陶瓷材料的素坯及烧结体的显微结构、力学性能的影响。 - The effect of particle distribution on silicon carbide extrusion paste's rheological property and green body density
粒度分布对碳化硅挤压成型流变性和坯体密度的影响 - The author manufactures melt-infiltrated silicon carbide with different technics. The influence of density of green body molding method grains match on the material structure and properties is analysed.
采用不同工艺制备渗硅碳化硅，分析了生坯密度、成型方法、颗粒级配等对制品结构及性能的影响。 - The effects of carbon content, moulding pressure, and carbon particle size of green body on microstructure and properties of reaction-bonded silicon carbide ( RBSC) have been investigated.
研究了反应烧结碳化硅陶瓷的显微组织和性能与生坯碳含量、成型压力以及碳粉粒度的关系。 - The density of green body is increased and the sintering condition is improved after adopting close packing theory.
采用紧密堆积理论对cBN进行级配后，坯体的致密度得到了提高，烧结状况也有明显的改善。 - Kinds of green body with complex shape were formed by through this method, with smooth surface and homogeneous density distribution and net size.
利用这种方法可以制备复杂形状的陶瓷坯体，并且表面光滑，密度分布均匀，是一种近净尺寸成型的方法。 - Rolling forming is plasticity method which is different form dry Pressing, it require plasticity green body.
该方法与传统的干压成形完全不同。它要求成形坯体具有一定的可塑性，是一种可塑性成形法。